Good Water Quality Ionpure CEDI LX-Z IP-LXM24Z-5 For Biopharmaceutical Industry

Ionpure LX-Z — Industrial CEDI Module

What are the features of the Siemens IP-LXM24ZEDI module?

1. Super strong electrical insulation performance;
2. Double O-ring seal ensures leak-free operation;
3. Operating costs are much lower than traditional ion exchange;
4. No acid, alkali, neutralization system or resin tank is required;
5. Can operate continuously at 7bar (100psi), 45C (113F);
6. Patented "full-filled" concentrate chamber, no need to add salt and concentrate circulation;
7. The water quality of the produced water is equal to or even better than the mixed bed water, and no chemical agents are required;
8. Continuous water production and stable water quality without fluctuations, unlike batch treatment equipment with periodic changes.

What are the components of Siemens IP-LXM24Z EDI module?
The EDI membrane block removes ions from water through the built-in ion exchange resin. Its application is as follows: (Na+ represents cations and C1- represents anions)
Due to the limitation of the filling capacity of the ion exchange resin in the EDI membrane block, the ion exchange resin will gradually become saturated after a period of use, so the ion exchange resin must be regenerated before it can continue to be used
The EDI membrane block is composed of several concentrated water chambers and fresh water chambers.
Pure water chamber---the working interlayer filled with mixed resin between the anion and cation exchange membranes to make pure water is called the pure water chamber
Concentrated water chamber---the working interlayer composed of anion and cation exchange membranes between the two pure water chambers is called the concentrated water chamber
Electrode plate---the conductive plate used to generate an electric field during the operation of the membrane block is called the electrode plate. It is usually divided into positive and negative electrodes, located at both ends of the membrane block.

What are the application areas of IP-LXM24Z?
1. Solar photovoltaic industry: pure water and ultrapure water for processes such as single/polycrystalline silicon, silicon wafer cutting, solar cells, semiconductor silicon materials, etc.
2. Electronics industry: ultrapure water for production processes such as semiconductor wafer cutting and manufacturing, semiconductor chips, semiconductor packaging, lead frames, integrated circuits, printed circuit boards, liquid crystal displays, touch screens, eyeglass lenses, digital camera lenses, conductive glass, cathode ray tubes, circuit boards, optical communications, computer components, capacitors, clean products and various components.
3. Biopharmaceutical industry: water for biotechnology, water for pharmaceutical production, water for biochemical products, injections, powder injections, pharmaceuticals, large infusions, medical sterile water, oral liquids, etc. meet GMP standards.
5. Chemical industry: pure water for production processes such as chemical process water, chemical reagents, chemical production water, fine chemicals, cosmetics, detergents, laundry detergents, printer inks, etc.
6. Conventional industry: pure water for production processes such as coated glass, electroplating and spraying, aluminum oxidation, vacuum coating, optical coating, surface coating, textile printing and dyeing, automotive appliances, batteries, industrial liquid preparation, industrial product cleaning, etc.
7. Softened water and desalted water equipment: feed water for various steam boilers, thermal power plants, hot water boilers, petrochemical thermal boilers, etc.
8. Power industry: pure water/ultrapure water for thermal power plants, thermal power plants, boiler power, etc.

LX-Z Series Features

• Wide range of ffow from 0.22 m3/h (1 gpm) to 10m3/h (44 gpm) per module

• Signiffcantly lower operating costs than conventional ion exchange

• Generates mixed-bed quality deionized water without the use of chemicals

• Continuous production instead of batch, with consistent quality

• Double O-ring seal guarantees* leak-free operation

• No need for acid/caustic, neutralization system or exchangable DI tanks

• Resin fflled concentrate for optimal performance and ease of operation

• Continuous operation

• Up to 0.05 ppm (total CI 2) feed

• Wetted materials of construction comply with NSF® 14 and NSF® 61 requirements

QUALITY ASSURANCE STANDARDS

CE mark certification, each module is strictly tested before leaving the factory to meet the high standards of the industry and is manufactured under the conditions of complying with ISO 9001 and ISO 14000 quality and environmental management system standards.

About the operating environment of the IONPURE LX-Z module:

The module should be installed indoors, away from direct sunlight, and ensure that the ambient temperature does not exceed 113°F (45°C) to ensure its stable and efficient operation. This can effectively extend the service life of the module while ensuring the stability and reliability of the water quality.

* Actual performance can be accurately estimated using the IP-Pro prediction tool provided by Ionpure.

*Performance data is based on testing at the maximum inlet water conductivity equivalent value (40 μS/cm), ensuring excellent deionization results in various application scenarios.

E-Cell EDI Technology Performance Examples

E-Cell EDI technology has been successfully applied in various industries such as power, petroleum, chemical, steel, pharmaceutical, and electronics.

For application cases, please click:https://www.fgwater.com/Industries/

About Us

FG Water Technologies (www.fgwater.com) is now an organic part of Wuxi Fenigal Science and Technology Co. Ltd., which is a high-tech entity integrating water treatment quipment design, manufacturing, trading and shipment served for main industrial sectors.

HAFE-FG Water Technologies has focused on the research of water treatment technology, equipment development and manufacturing, testing and international shipment etc. We work with many leading large-scale or small-medium original equipment manufacturers in China High-tech Development Zones, and engaged ourselves in R&D, manufacturing, and quality testing.

Our main products include a variety of water purification and different treatment equipment, such as seawater reverse osmosis (SWRO) system, brackish water rever osmosis (BWRO), ultrafiltration (UF)system, Electrodeionization/EDI equipment, media pressure filters and ion exchanger softeners. So far, our company has become a major water treatment equipment supplier for food and beverage industry, pharmaceutical industry, chemical industry, electric power industry, urban water supply industry, municipal and industrial wastewater treatment and more industries, as well as being an exporter to more than 20 countries and regions in Asia, Europe, the Americas, Africa, etc.

OUR CLIENTS

PRODUCTION SYSTEM

Our production system consist of a list of industry-specialized partnership factories accross China. Some of them singularly cover an area of over 10,000 square meters, including 5,000 square meters of workshop and warehouse and 1,500 square meters of office buildings. All of our technical staff has more than 10 years of experience in the design of water treatment systems, so we are able to provide the perfect solution for all kinds of water purification and sewage treatment applications.

Since the establishment, the Company has always regarded quality as the life of our business. We choose the best components only for the production of various water treatment systems. Our systems are easy to use and maintain, and they stays highly reliable even under toughest conditions.