Wuxi Fenigal Science & Technology Co., Ltd.
Wuxi Fenigal Science & Technology Co., Ltd Manufacturer and Supplier for Industrial & Lighting Products
Add to Cart
Super Strong Electrical Insulation Ionpure CEDI LX-Z IP-LXM18Z-5 For Industrial
Ionpure LX-Z — Industrial CEDI Module
Siemens EDI module IP-LXM18Z structural features
Siemens EDI module is a device composed of resin and membrane chamber. Because it utilizes the principle of electrodialysis, EDI module is also called electrodialysis device.
Siemens IP-LXM18Z module is mainly composed of feed liquid pretreatment system, membrane stack pretreatment system, membrane stack, electrode, process control system and power system.
According to the structural diagram, EDI membrane stack is composed of a certain number of units sandwiched between two electrodes. There are two different types of chambers in each unit, the fresh water chamber to be desalted and the concentrated water chamber to collect the removed impurity ions.
Working principle of Siemens EDI module IP-LXM18Z
Siemens EDI module IP-LXM18Z uses anion and cation exchange membranes alternately arranged between positive and negative electrodes, and separates them with special partitions to form two systems: desalination and concentration. When brine is introduced into the compartment, under the action of the DC electric field, cations migrate to the cathode and can only pass through the cation exchange membrane, and anions migrate to the anode and can only pass through the anion exchange membrane, so that the brine in the desalination chamber is desalinated and the brine in the concentration chamber is concentrated.
This technology of using electrolyzed water for ion replacement is called electro-deionization EDI technology. It relies on the action of the electric field to remove inorganic ions in water. It is a new pure water preparation technology that has emerged in recent years. The advantages of this technology are very prominent. It solves the shortcomings of electrodialysis that cannot desalinate deeply, and can ensure that ion exchange works continuously. It can operate 24 hours a day, and the water quality of the produced water is stable, which can meet the requirements of ultrapure water and boiler water for resistivity, hardness and silicon.
The LX-Z series membrane stack is an industrial CEDI developed by Siemens for industrial wastewater desalination and industrial ultrapure water deionization. The EDI has a long service life and can run continuously to meet industrial production needs without stopping for regeneration. However, Siemens EDI also has high requirements for the quality of influent water. When using Siemens EDI, you must choose a reliable agent that can provide comprehensive after-sales service.
CE mark certification, each module is strictly tested before leaving the factory to meet the high standards of the industry and is manufactured under the conditions of complying with ISO 9001 and ISO 14000 quality and environmental management system standards.
About the operating environment of the IONPURE LX-Z module:
The module should be installed indoors, away from direct sunlight, and ensure that the ambient temperature does not exceed 113°F (45°C) to ensure its stable and efficient operation. This can effectively extend the service life of the module while ensuring the stability and reliability of the water quality.
* Actual performance can be accurately estimated using the IP-Pro prediction tool provided by Ionpure.
*Performance data is based on testing at the maximum inlet water conductivity equivalent value (40 μS/cm), ensuring excellent deionization results in various application scenarios.
E-Cell EDI Technology Performance Examples
E-Cell EDI technology has been successfully applied in various industries such as power, petroleum, chemical, steel, pharmaceutical, and electronics.
For application cases, please click:https://www.fgwater.com/Industries/
About Us
FG Water Technologies (www.fgwater.com) is now an organic part of Wuxi Fenigal Science and Technology Co. Ltd., which is a high-tech entity integrating water treatment quipment design, manufacturing, trading and shipment served for main industrial sectors.
HAFE-FG Water Technologies has focused on the research of water treatment technology, equipment development and manufacturing, testing and international shipment etc. We work with many leading large-scale or small-medium original equipment manufacturers in China High-tech Development Zones, and engaged ourselves in R&D, manufacturing, and quality testing.
Our main products include a variety of water purification and different treatment equipment, such as seawater reverse osmosis (SWRO) system, brackish water rever osmosis (BWRO), ultrafiltration (UF)system, Electrodeionization/EDI equipment, media pressure filters and ion exchanger softeners. So far, our company has become a major water treatment equipment supplier for food and beverage industry, pharmaceutical industry, chemical industry, electric power industry, urban water supply industry, municipal and industrial wastewater treatment and more industries, as well as being an exporter to more than 20 countries and regions in Asia, Europe, the Americas, Africa, etc.
Our production system consist of a list of industry-specialized partnership factories accross China. Some of them singularly cover an area of over 10,000 square meters, including 5,000 square meters of workshop and warehouse and 1,500 square meters of office buildings. All of our technical staff has more than 10 years of experience in the design of water treatment systems, so we are able to provide the perfect solution for all kinds of water purification and sewage treatment applications.
Since the establishment, the Company has always regarded quality as the life of our business. We choose the best components only for the production of various water treatment systems. Our systems are easy to use and maintain, and they stays highly reliable even under toughest conditions.